How To Make DIY LED Light Colors

LED lights are not that costly but the colored ones or even the colored LED strips are quite costly. The 5-foot long LED strips on cost around $ 30 which can be a bit unreasonable compared to white LEDs. It might even make you wonder, how much can a bit of color cost that they are charging like this?

Well, the better alternative would be to make your own colored LED lights. Most people don’t know how to make DIY LED light colors, so we have written a detailed article that will help you to make colored LED lights right at home! We will also give you tips on how to make specific colors using your remote and LED light strips.

How To Make DIY LED Light Colors
Image credit: canva.com

How To Make DIY LED Light Colors? Things You’ll Need

To make DIY LED lights you will need the right tools and materials. Most of the stuff you will need will be in your local electronics store but if you want you can definitely order all the stuff you need from online store. So, get ready and note down the things you will be needing to make DIY LED lights. We will show you 3 ways to make DIY LED lights but the third technique uses LED light strips for those of you who want to make specific colors only.

Here Is A List If You Are Trying Technique 1:

  • 5mm LED lights
  • Fine Sandpaper (Try to get the ones between 200-400) 
  • Colored markers (All the colors you want your LED lights to be)

That’s it! That’s all you will need for technique 1.

Here Is A List If You Are Trying Technique 2:

  • 5mm LED lights
  • Transparent tape
  • Colored markers

And that’s about everything you will need for technique 2.

For The Technique 3 You Will Need:

  • LED light strips
  • Remote control
  • Stable power source

And that’s about all you will need for the third technique.

Required Materials & Tools

For our purpose we used 5mm LED bulbs, we bought 100 white LEDs from online shop for just $7 with shipping! If you have a store nearby that sells 5mm, go for it! For the first technique, we will use a 240 fine sandpaper to diffuse the LEDs.

Just make sure you get a paper between 200 and 400. For the second technique, you will need to get a roll of transparent tape on which you will color the LEDs. And for both the techniques we are going to use color markers.

How To Make DIY LED Light Colors
Image credit: pixabay.com

3 Different Technique On How To Make DIY LED Light Colors

Before we get into the process, make sure the LED prongs are disconnected from the electricity source. Safety first!

Simply turn the power button off and disconnect the prongs from the socket and you should be good to go. Once the LEDs are unplugged and you are out of any sort of hazardous situation, it’s time to get started with the whole process of how to make DIY LED light colored.

How To Make DIY LED Light Colors? Technique 1

Step 1: Diffusing A LED

Get as many LEDs as you want and start diffusing them with sandpaper. Don’t be too harsh with them, you don’t want to damage the core of the LED while you are sanding it. This step will remove the smooth surface of the LED and give it a harsh surface to paint on.

Step 2: Color The LED

This step seems easy but it took us the most time to get it right. Just take the color markers and paint over the LEDs you have been sanding. Make sure you paint the entire LED, including the base of the LED. After it dries a bit, connect each one to the power source and check if there is any spot left to be painted. If there is, paint over it and you may want to double coat some of the lighter colors to make sure they look good in the dark.

How To Make DIY LED Light Colors? Technique 2

Step 1: Using Transparent Tape

This is a much simpler technique where you won’t need to sand the LEDs. Just get a bit of transparent tape and tape all over your LEDs. Make sure you cover all the spots with tape!

Step 2: Coloring The LEDs

Just color over the tape and let the LEDs dry up. After it dries, connect it to a power source and check if there is any leakage of white light. If there is, then apply a bit of tape and color over the tape again.

How To Make DIY LED Light Colors? Technique 3

Step 1: Set Up The LED Light Strips

The LED strips you bought should have some adhesive on the back and setting up the strip should be as easy as using tape. But the tricky part of LED strips is getting the right color.

Step 2: Using The Remote To Get The Right Color

The 40 buttons on the LED strip remote can seem a bit intimidating at first but once you get used to it you will definitely fall in love with the LED strip. All you need to know is that there are 3 down arrows and pressing them for 20 seconds each will turn off all the colors. When the colors are turned off you can use the up arrows and adjust the strip to any color you want.

How To Make DIY LED Light Colors
Image credit: walmart.com

Finished Result

In the first two techniques, the LEDs colors are fixed and if you want a different color you will need to use new LEDs. But these two techniques are cheaper than the third one. On the other hand, the third technique is pretty easy to set up and changing the color is just a click away.

So, as you can see the whole process of how to make DIY LED light colors isn’t actually that difficult and we can wrap it up by decorating your room just the way you want.

Decoration

You can easily decorate your room however you want with the colored LEDs. LEDs are an affordable way to change the look of your room.

Tip

Here are a few tips on how to make DIY LED light colors:

  1. Make sure you sand the base or else you won’t be able to color the bottom of the LED
  2. Make sure you apply tape everywhere on the LED if you are using technique 2
  3. Double check every LED after you have colored them to make sure there is paint on all the spots.
  4. Double coat the lighter colors as they don’t set in easily on the LEDs.

Warnings

You should be aware of a few additional warnings as well. Firstly, make sure the LEDs are unplugged from any power source. Safety should always be the top priority. Secondly, don’t sand the LED bulbs too harshly as it might damage the bulb. Thirdly, make sure you don’t hurt your fingers on the LED prongs. Lastly, don’t press down on the LEDs too hard as they might burst.

How To Make DIY LED Light Colors
Image credit: canva.com

Frequently Asked Question

How do you mix DIY LED colors?

To mix LED colors all you have to do is google the base RGB colors and double coat the LED with the base colors. Mixing color is easy, for example, mix blue and green to make a teal color, or mix red and blue to make a hot pink!

How do you make LED lights Lavender?

To make your LED lights Lavender, dim down the strip with your remote. Then press blue nine times and press red fifteen times. That should do the trick.

How do you make purple LED lights?

To make your LED lights purple, dim down the strip with your remote. Then press blue twenty times and press red fifteen times. That should make the strip purple!

How do you make peach color with LED?

To make your LED lights peach, dim down the strip with your remote. Then turn red all the way up and then press green seven times.

How do you make hot pink LED lights?

To make your LED lights hot pink, dim down the strip with your remote. Then turn red all the way up and then press blue twice.

Read also: Can You Sleep with Led Strip Lights On

How To Make DIY LED Light Colors? Conclusion

We provided a detailed overview of three techniques on how to make DIY LED light colors, and now it should be easy for you. We hope this article has helped you figure out how to make LED lights at home or how to get specific colors on your light strips. If you have any questions, please feel free to write that in the comment section below. Also, you can read our other articles where we talk about everything related to light. We wish you a happy and healthy life.

Technique A

  • Step 1: Cut A Piece Of Tape This technique is similar to the first one, but instead of sanding the LED, you will use a piece of transparent tape to cover it. Cut a piece of tape that is slightly larger than the LED and stick it on the LED. Make sure there are no air bubbles or wrinkles on the tape.
  • Step 2: Color The Tape Now, you can use the colored markers to color the tape on the LED. You can use any color you want, but make sure you cover the entire tape with the marker. You can also mix different colors to create new shades. For example, you can use red and blue markers to make purple. After you are done coloring, connect the LED to the power source and see how it looks. You can always add more layers of color if you want to make it darker or brighter. How To Make DIY LED Light Colors?

Technique B

  • Step 1: Get A RGB LED Strip This technique is for those who want to make specific colors using a remote control and a LED strip. A RGB LED strip is a type of LED that can produce different colors by mixing red, green, and blue light. You can buy a RGB LED strip from online store or any electronics store. Make sure you get a remote control and a stable power source along with the strip. You can also get a Daybetter LED strip, which is a popular brand of RGB LED strips that has many features and smart functions.
  • Step 2: Connect The RGB LED Strip To connect the RGB LED strip, you will need to follow the instructions that come with the product. Usually, you will need to connect the pin of the strip to the controller, which is a small device that controls the color and brightness of the strip. Then, you will need to connect the controller to the power source, which can be a battery, a plug, or a USB. Make sure the connections are secure and the wires are not exposed.
  • Step 3: Use The Remote Control To Change Colors Now, you can use the remote control to change the colors of the RGB LED strip. The remote control will have different buttons that correspond to different colors and modes. You can press the buttons to select the color you want, or use the app on your phone to control the strip. Some RGB LED strips also have Wi-Fi connectivity, which means you can control them with your voice or automation systems. For example, you can use Amazon Alexa or Google Assistant to change the colors of the strip with your voice commands.
  • Step 4: Enjoy Your DIY LED Light Colors You can use the RGB LED strip to create different effects and moods with your DIY LED light colors. You can stick the strip on your wall, your ceiling, your furniture, or anywhere you want. You can also use the strip to create a display or a video with different colors and patterns. You can find many YouTube videos that show you how to make DIY LED light colors with RGB LED strips. You can also use the strip to stage your room or your house for different occasions, such as parties, holidays, or events.

How to Change a Light Bulb in a Stairwell

Changing a light bulb may appear to be a simple task, and it is undoubtedly. There are, however, some critical safety precautions to be aware of…

How to Change a Puck Light Bulb

Changing a light bulb can be one of the easiest things to do but, you have to know the proper procedure. You really don’t want to call up an electrician every time you need…

How to Change a Light Switch Without Turning Off the Power

Electric outlets are sealed off so that you won’t get shocked every time you plug in a power brick. It is designed to keep the current out…

How to Make Copper Wire LED Lights

If you’re already thinking about decorating your home with lights, the festive season is here. Store-bought holiday lights, on the other hand, can be pricey…

How To Make A Light Bulb Less Bright

We are all aware of the benefits of light bulbs, and how they provide dazzling light for us to see things properly although they may also be bothersome…